Controls
-
$377.18- Climatemaster thermostat
- Dehumidification output is designed to work with Whole House Dehumidification Modulating Reheat option or with ECM fan motor dehumidification mode
- Integrated control of both temperature and relative humidity
- Integrated control eliminates separate thermostat and dehumidistat/humidistat
- Thermostat can be programmed to use humidification output to control a humidifier
- Digital Night Setback mode initiated by an external signal (when using a DXM/DXM2 controller)
-
$337.71
- Climatemaster thermostat
- With DXM2 can set ECM motor CFM from minimum to maximum by 25 CFMs; can view 6 unit sensors – Entering the water, Leaving the water, Supply Air, Discharge line, entering and leaving TXV temperatures; check inputs and see dip switch configurations
- Dehumidification output is designed to work with the Whole House Dehumidification Modulating Reheat option or with ECM fan motor dehumidification mode
-
$358.80- Climatemaster thermostat
- LCD Hi resolution touch screen display
- Heat pump or DX with gas or electric heat
- Up to 4 heat and 2 cool stages
- Humidity sensor included
- Internet enabled
- Can monitor any number of Wi-Fi sensors
- 7-day programmable
- Wi-Fi – free mobile apps available
- Lockout feature
- Programming and setpoints stored in non-volatile
-
-
$178.94
- Climatemaster CXM controller
- Service pack kit
- Replaces: 17B0001N01, S17B0001N01
-
$41.09- Danfoss Refrigeration Thermostat
- Temperature range [°C]: -30 to 30
- Reset function: Auto
- Contact function: SPDT
- Capillary tube length [mm]: 3000
- Enclosure rating IP: IP20
-
$16.71- Eaton Cutler-Hammer
- 5 to 28 Volt
- 30-1/2mm Hole
- For Use with Indicating Lights, Pushbuttons
-
$420.98- Eaton Load Center
- 3 Phase
- 1 NEMA Rating
- 14.31 Inch Wide
- 3.88 Inch Deep
- 16-3/4 Inch High
- Mfr Part #: CH12L3125B
- UPC #: 78211309735
- Country of Origin: United States
-
$35.44- Eaton Cutler-Hammer
- Thermal Magnetic Trip
- 10 kA Breaking Capacity
- 14-4 AWG
-
$79.01- Eaton Cutler-Hammer
- Thermal Magnetic Trip
- 10 kA Breaking Capacity
- 14-4 AWG
-
$139.51- Eaton Cutler-Hammer
- Thermal Magnetic Trip
- 14-4 AWG
- 2-3/8 Inch Deep
- 2-15/16 Inch High
- 2 Inch Wide
-
$63.14
- Eaton Cutler-Hammer
- Thermal Magnetic Trip
- 14-4 AWG
- 2-3/8 Inch Deep
- 2-15/16 Inch High
- 1 Inch Wide
-
$37.76- Eaton Cutler-Hammer
- 120 VAC/VDC
- Pressure Terminal
- 30-1/2mm Hole
- For Use with E34 Operators
- Standard 10250T
-
$654.45- Eaton Cutler-Hammer
- NEMA 1
- 1 Phase
- 7-1/2 hp at 480 VAC
- 10 hp at 600 VAC (Single Phase)
- 15 hp at 480 VAC
- 20 hp at 600 VAC (Triple Phase)
- 3PST Contact Form
-
$86.94- Eaton Cutler-Hammer
- Color: Black
- Maintained (MA)
- Nonilluminated
- 1 Contact Block
- NO/NC
- Oil and Watertight
-
$65.59- Eaton Cutler-Hammer
- Round
- Green Pushbutton
- Nonilluminated
- Momentary (MO)
- Corrosion Resistant
- Oiltight and Watertight
-
-
$2,484.34- Eaton Enclosed Control
- Amperage Rating: 7 A
- Coil Voltage: 120/110 VAC
- Dimensions: 6.66 in L x 15.5 in W x 23.06 in H
- Enclosure Type: NEMA 1
- Frequency Rating: 50/60 Hz
- Full Load Current: 1 to 5 A
- Number of Poles: 3
- Overload Relay: C440 Solid-State Electronic
- Phase: 3
- Reset Type: Manual/Automatic
- Series: Freedom ECN22
- Type: Combination Full Voltage Non-Reversing Circuit Breaker
-
$87.82- Eaton Cutler-Hammer
- Load Center Cover
- UPC #: 78211309884
- Country of Origin: United States
-
$219.55- Eaton Relay
- NEMA, IEC
- NEMA Size 00, 0, IEC Size A-F
- DIN rail, panel
- Heaters required
- Used with GST00-160
- 20-39A
- Thermal Trip Type
- Three-pole
-
$711.47- Eaton Control
- 27 Amp
- NEMA Size 1
- Non-reversing Starter
- Freedom
- 600V Rated
- Single-phase, three-phase
- Thermal Overload Relay
- 120 VAC/ 60 Hz – 110 VAC/ 50 Hz Coil
- Heater Pack required for Overload Protection
- Starter w/C306 bi-metal OLR
- 2 hp at 115V, 3 hp at 230V, 7-1/2 hp at 208,240V, 10 hp at 480,600V
-
$1,317.95- Eaton Thermal Overload
- 45 Amp
- NEMA Size 2
- Non-reversing Starter
- Freedom
- 600V Rated
- 3-Phase Magnetic
- Thermal Overload Relay
- 120 VAC/ 60 Hz – 110 VAC/ 50 Hz Coil
- Starter w/C306 bi-metal OLR
- 3 hp at 115V, 7-1/2 hp at 230V, 10 hp at 208V, 15 hp at 240V, 25 hp at 480,600V
- Heater Pack required for Overload Protection
-
$375.24- Eaton Relay
- NEMA, IEC
- NEMA Size 1, 2, IEC Size G-K
- Freedom Series
- Panel mounting
- Heaters required
- Ring lug terminals
- 60-79A
- Thermal Trip Type
- Three-pole
-
$497.03- Eaton Control
- NEMA Full Voltage Non-reversing Starter
- Freedom
- 3-phase Magnetic
- Starter w/C306 bi-metal OLR
- Size 00
- 3-pole
- Max HP Rating: 1/3 hp at 115V,1 hp at 230V, 1-1/2 hp at 208,240V, 2 hp at 480,600V
- Interchangeable Heater Overload Relay
- 120 Vac/ 60 Hz – 110 Vac/ 50 Hz Coil
- Heater Packs Must Be Purchased Separately
- Amperage: 32
